Specifications

Whether you need an all-day continuous power or a backup power, none are built tougher than ABLE's 8kVA, 240V diesel generator!

This water-cooled, low RPM (1500 RPM) generator model can provide continuous stable power at prime load for up to 30 hours and withstand the extremely hot conditions in Australia’s North, no wonder it’s our best-seller generator for prime or standby use in residential, commercial, or farming operations.

 

Key Features:

  • Reliable Engine: Equipped with our time-proven reliable OEM 3 Cylinder Low RPM Diesel engine
  • Robust Design: Tough-built, super-silenced canopy designed for outdoor.
  • Watercooled: So it will run and withstands extremely hot conditions while it also extends the life of the engine over time.
  • Stable Operation:  30 hours continuous stable power at prime load. Its low 1500 RPM engine, generates more stable operation.
  • Silent Operation:  A mere 65db at 7 metres. It will have minimum effect on farm animals and worksite sleeping quarters
  • Fuel-efficiency: Diesel fuelled - 2 Litres/Hour at prime load. Low fuel consumption. Low cost. A savings you can’t ignore!
  • Highest Safety Standards: Australian Safety Standards compliant
  • Easy to Use: The digital control panel makes the generator easy to use.
  • Easy Transportability: Designed with forklift slots for easy transportation.

 

Prime Power : 8kW / 8kVA 240 Volts 33Amps
Standby Power : 8.8kW / 8.8kVA
Power Factor : 1
Phase Voltage : Single Phase 240 Volt
Frequency : 50 Hertz
Engine : OEM 3 Cylinder Diesel
RPM : 1500/min
Cooling Method : Water Cooled - Rated For Australia's North
Alternator : Single Phase 4 Pole Brushless Synchronous -/c AVR
Starter System : 12-volt Electric - Battery Included
Controller : Smartgen HGM4010N
  2 Wire / Remote Start Capable
  Over Temperature Protection
  Over Current Protection
  Low Oil Protection
Safety Systems : Battery Isolator
  Emergency Stop
  Failsafe Shutdown Fuel Solenoid
Noise Level : 65 dBA at 7 metres
Fuel Tank Capacity : 60 Litres (-/c Fuel Gauge)
Running Time : 30 Hours Continuous (prime load)
Fuel Consumption : 2 Litres/Hour (prime load)
Chassis Enclosure : Lockable
  Sound Deadening Throughout
  Weather-Resistant Powder Coating
  External Use
Mine Site Ready Bunding : No
ATS (Mains Failure) : Easy Connect Plug (ATS Box Optional)
Single Phase Outlets : 3 x 15 Amp IP66
Three Phase Outlets : No
Hardwire Terminals : Yes
RCD : Australian Standard (IP67 Enclosed)
Options : Automatic Start Systems
  GSM
  Timer
  Wireless Remote
  Solar System Compatible (Majority)
  ATS (Mains Failure Detection / Auto Transfer Switch)
  Minespec Padlockable Battery Isolator
Weight : 560 kg
Dimensions : 141 L x 72 W x 111 H cm