Specifications

The ABLE 17kVA, 415V diesel generator is powered with an OEM time-proven reliable 4 cylinder diesel engine combined with the three-phase 4-pole brushless synchronous alternator. Add to that, with the super-silenced, weather-resistant robust-canopy and water cooling method, this generator is economical, efficient, silent, and robust suited for various commercial and industrial prime or backup power applications.

 

Key Features:

  • Reliable Engine: Equipped with our time-proven reliable OEM 4 Cylinder Diesel engine
  • Robust Design: Tough-built, super-silenced, weather-resistant canopy designed for outdoor.
  • Watercooled: So it will run and withstands extremely hot conditions while it also extends the life of the engine over time.
  • Stable Operation:  30 Hours Continuous stable power at prime load. Its low 1500 RPM engine generates a more stable operation.
  • Silent Operation:  63dbA at 7 metres, just similar to a normal conversation.
  • Fuel efficiency: Diesel fuelled - 3 Litres/Hour at prime load. Low fuel consumption. Low cost. A savings you can’t ignore!
  • Highest Safety Standards: Australian Safety Standards compliant.
  • Easy to Use: The digital control panel makes the generator easy to use.
  • Easy Transportability: Designed with forklift slots for easy transportation.

 

Prime Power : 13.6kW / 17kVA 415 Volts 24Amps
Standby Power : 15kW / 18.7kVA
Power Factor : 0.8
Phase Voltage : Three Phase 415 Volt
Frequency : 50 Hertz
Engine : OEM 4 Cylinder Diesel
RPM : 1500/min
Cooling Method : Water Cooled - Rated For Australia's North
Alternator : Three Phase 4 Pole Brushless Synchronous -/c AVR
Starter System : 12-volt Electric - Battery Included
Controller : Comap MRS11
  2 Wire / Remote Start Capable
  Over Temperature Protection
  Over Current Protection
  Low Oil Protection
Safety Systems : Battery Isolator
  Emergency Stop
  Failsafe Shutdown Fuel Solenoid
Noise Level : 63 dBA at 7 metres
Fuel Tank Capacity : 90 Litres (-/c Fuel Gauge)
Running Time : 30 Hours Continuous (prime load)
Fuel Consumption : 3.0 litres/hour (prime load)
Chassis Enclosure : Lockable
  Sound Deadening Throughout
  Weather-Resistant Powder Coating
  Stainless Steel Fittings
  External Use
Mine Site Ready Bunding : Yes
ATS (Mains Failure) : Easy Connect Plug (ATS Box Optional)
Single Phase Outlets : 3 x 15 Amp IP66
Three Phase Outlets : 1 x 20 Amp IP66
Hardwire Terminals : Yes
RCD / RCBO : Australian Standard (IP67 Enclosed)
Options : Automatic Start Systems
  GSM
  Timer
  Wireless Remote
  Solar System Compatible (Majority)
  ATS (Mains Failure Detection / Auto Transfer Switch)
  Minespec Padlockable Battery Isolator
Weight : 770 kg
Dimensions : 167 L x 76 W x 117 H cm