Cummins has almost a century in making the world's most reliable engines. It's a name you know and trust. Our 82kVA diesel generator has Cummins reliability at its core, enclosed in one of the best canopies and feature sets you can find in the country. Water cooling, a 24-hour fuel tank, top-of-the-line safety features, a tough outdoor-ready exterior, and a silenced canopy aren't added bonuses, they're standard. All of these and the peace of mind of a Cummins Australian warranty make for a prime piece of machinery. This is one basket you can put all your eggs into with confidence.
Key Features:
Prime Power : | 60kW / 75kVA 415Volts 105Amps |
Standby Power : | 66kW / 82kVA |
Power Factor : | 0.8 |
Phase Voltage : | Three Phase 415 Volt |
Frequency : | 50 Hertz |
Engine : | Cummins Engine Diesel Turbo Charged |
RPM : | 1500/min |
Cooling Method : | Water Cooled - Rated For Australia's North |
Alternator : | Stamford 3 Phase 4 Pole Brushless Synchronous with AVR |
Starter System : | 24 volt Electric - Battery Included |
Controller : | COMAP MRS16 IL4 Controller |
2 Wire / Remote Start Capable
|
|
Over Temperature Protection
|
|
Over Current Protection
|
|
Low Oil Protection
|
|
Safety Systems : | Battery Isolator |
Emergency Stop | |
Failsafe Shutdown Fuel Solenoid | |
Noise Level : | 65 dBA at 7 metres |
Fuel Tank Capacity : | 310 Litres (-/c Fuel Gauge) |
Running Time : | 21 Hours Continuous (prime load) |
Fuel Consumption : | 15 litres/hour (prime load) |
Chassis Enclosure : | Lockable |
Sound Deadening Throughout | |
Weather Resistant Powder Coating | |
Stainless Steel Fittings | |
External Use | |
Mine Site Ready Bunding : | Yes |
ATS (Mains Failure) : | Easy Connect Plug (ATS Box Optional) |
Single Phase Outlets : | 1 x 15 Amp IP66 |
Three Phase Outlets : | 1 x 20 Amp IP66 |
2 x 32 Amp IP66 | |
Hardwire Terminals : | Yes |
RCD / RCBO : | Australian Standard (IP67 Enclosed) |
Options : | Automatic Start Systems |
GSM
|
|
Timer
|
|
Synchronization
|
|
Wireless Remote
|
|
Solar System Compatible (Majority)
|
|
ATS (Mains Failure Detection / Auto Transfer Switch)
|
|
Minespec Padlockable Battery Isolator | |
Weight : | 1400 kg |
Dimensions : | 235 L x 95 W x 165 H cm |