Specifications

Prime Power : 14.0kW / 17.5kVA 415Volts 25Amps
Standby Power : 15.2kW / 19kVA
Power Factor : 0.8
Phase Voltage : Three Phase 415 Volt
Frequency : 50 Hertz
Engine : Kubota V2203
RPM : 1500/min
Cooling Method : Water Cooled - Rated For Australia's North
Alternator : Leroy Somer 3  Phase 4 Pole Brushless Synchronous -/c AVR
Starter System : 12 volt Electric - Battery Included
Controller : Comap MRS11 controller
 
2 Wire / Remote Start Capable
 
Over Temperature Protection
 
Over Current Protection
 
Low Oil Protection
Safety Systems : Battery Isolator
  Emergency Stop
  Failsafe Shutdown Fuel Solenoid
Noise Level : 61 dBA at 7 metres
Fuel Tank Capacity : 75 Litres (-/c Fuel Gauge)
Running Time : 19 Hours Continuous (prime load)
Fuel Consumption : 4 litres/hour (prime load)
Chassis Enclosure : Lockable
  Sound Deadening Throughout
  Weather Resistant Powder Coating
  Stainless Steel Fittings
  External Use
Mine Site Ready Bunding : Yes
ATS (Mains Failure) : Easy Connect Plug (ATS Box Optional)
Single Phase Outlets : 2 x 15 Amp IP66
Three Phase Outlets : 1 x 20 Amp IP66
  1 x 32 Amp IP66
Hardwire Terminals : Yes
RCD / RCBO : Australian Standard (IP67 Enclosed)
Options : Automatic Start Systems
 
GSM
 
Timer
 
Synchronisation
 
Wireless Remote
 
Solar System Compatible (Majority)
 
ATS (Mains Failure Detection / Auto Transfer Switch)
  Minespec Padlockable Battery Isolator
Weight : 563 kg
Dimensions : 151 L x 73 W x 109 H cm