Specifications

Prime Power : 6 kW / 6 kVA 240Volts 25Amps
Standby Power : 7 kW / 7 kVA
Power Factor : 1
Phase Voltage : Single Phase 240 Volt
Frequency : 50 Hertz
Engine : Kubota 3 Cylinder Diesel D1105
RPM : 1500/min
Cooling Method : Water Cooled - Rated For Australia's North
Alternator : Single Phase 4 Pole Brushless Synchronous -/c AVR
Starter System : 12 volt Electric - Battery Included
Controller : Smartgen HGM4010N Series
 
2 Wire / Remote Start Capable
 
Over Temperature Protection
 
Over Current Protection
 
Low Oil Protection
Safety Systems : Battery Isolator
  Emergency Stop
  Failsafe Shutdown Fuel Solenoid
Noise Level : 62 dBA at 7 metres
Fuel Tank Capacity : 28 Litres (-/c Fuel Gauge)
Running Time : 16 Hours Continuous (prime load)
Fuel Consumption : 1.8 litres/hour (prime load)
Chassis Enclosure : Lockable
  Sound Deadening Throughout
  Weather Resistant Powder Coating
  Stainless Steel Fittings
  External Use
Mine Site Ready Bunding : Yes
ATS (Mains Failure) : Easy Connect Plug (ATS Box Optional)
Single Phase Outlets : 1 x 32Amp 2 x 15 Amp IP66
Three Phase Outlets : No
  No
Hardwire Terminals : Main 32 Amp Socket
RCD / RCBO : Australian Standard (IP67 Enclosed)
Options : Automatic Start Systems
 
GSM
 
Timer
 
Synchronisation
 
Wireless Remote
 
Solar System Compatible (Majority)
 
ATS (Mains Failure Detection / Auto Transfer Switch)
  Minespec Padlockable Battery Isolator
Weight : 510 kg
Dimensions : 133 L x 68 W x 100 H cm