Specifications

Prime Power : 1,400kW / 1,750kVA 415 Volts 2,450Amps
Standby Power : 1,320kW / 1,540kVA
Power Factor : 0.8
Phase Voltage : Three Phase 415 Volt
Frequency : 50 Hertz - Electronic Speed Controlled
Engine : CUMMINS Diesel KTA38-G5 + KTA38-G2
RPM : 1500/min
Cooling Method : Water Cooled - Rated For Australia's North
Alternator : STAMFORD Three Phase 4 Pole Brushless HCI634J + LVI634B
Starter System : 24 volt Electric - Batteries Included
Controller : Comap IC-MINT Synchronisable
 
2 Wire / Remote Start Capable
 
Over Temperature Protection
 
Over Current Protection
 
Low Oil Protection
Safety Systems : Battery Isolator
  Emergency Stop
  Failsafe Shutdown Fuel Solenoid
Noise Level : 75 dBA at 7 metres
Fuel Tank Capacity : 1000 Litres + 1000 Litres (-/c Fuel Gauge)
Running Time : 4.8 Hours + 6 Hours Continuous (prime load) without auxiliary fuel tank
Fuel Consumption : 376 Litres/Hour (prime load)
Chassis Enclosure : Lockable
  Sound Deadening Throughout
  Weather-Resistant Powder Coating
  Stainless Steel Fittings
  External Use
Mine Site Ready Bunding : Yes
ATS (Mains Failure) : Easy Connect Plug (ATS Box Optional)
Hardwire Terminals : Yes
RCD : Australian Standard (IP67 Enclosed)
Options : Automatic Start Systems
 
GSM
 
Timer
 
Synchronisation
 
Wireless Remote
 
Solar System Compatible (Majority)
 
ATS (Mains Failure Detection / Auto Transfer Switch)
  Minespec Padlockable Battery Isolator
Weight : 14,950 kg + 14,375 kg
Dimensions : 605 L x 244 W x 290 H cm + 605 L x 244 W x 290 H cm