The ABLE 25kVA, 415V diesel generator boasts a Forward ( Isuzu) 4 Cylinder Diesel 4JB1 engine paired with quality renowned Stamford PI144E 3 Phase 4 Pole Brushless Synchronous -/c AVR alternator. Add to that the super-silenced, weather-resistant robust-canopy and water cooling method, this generator can withstand harsh climate even in Australia’s North!
It offers an impressive consistent output of up to 32 hours of continuous runtime at prime load. With a noise level that’s approximately just similar to a normal conversation, this generator is best suited for various commercial and industrial prime or backup power applications.
Key Features:
Prime Power : | 20kW / 25kVA 415Volts 35Amps |
Standby Power : | 22kW / 27kVA |
Power Factor : | 0.8 |
Phase Voltage : | Three Phase 415 Volt |
Frequency : | 50 Hertz |
Engine : | Forward (Previously Isuzu) 4 Cylinder Diesel 4JB1 |
RPM : | 1500/min |
Cooling Method : | Water Cooled - Rated For Australia's North |
Alternator : | Stamford PI144E 3 Phase 4 Pole Brushless Synchronous -/c AVR |
Starter System : | 12-volt Electric - Battery Included |
Controller : | Comap MRS11 |
2 Wire / Remote Start Capable
|
|
Over Temperature Protection
|
|
Over Current Protection
|
|
Low Oil Protection
|
|
Safety Systems : | Battery Isolator |
Emergency Stop | |
Failsafe Shutdown Fuel Solenoid | |
Noise Level : | 64 dBA at 7 metres |
Fuel Tank Capacity : | 180 Litres (-/c Fuel Gauge) |
Running Time : | 32 Hours Continuous (prime load) |
Fuel Consumption : | 5 litres/hour (prime load) |
Chassis Enclosure : | Lockable |
Sound Deadening Throughout | |
Weather-Resistant Powder Coating | |
Stainless Steel Fittings | |
External Use | |
Mine Site Ready Bunding : | Yes |
ATS (Mains Failure) : | Easy Connect Plug (ATS Box Optional) |
Single Phase Outlets : | 2 x 15 Amp IP66 |
Three Phase Outlets : | 1 x 20 Amp IP66 |
1 x 32 Amp IP66 | |
Hardwire Terminals : | Yes |
RCD / RCBO : | Australian Standard (IP67 Enclosed) |
Options : | Automatic Start Systems |
GSM
|
|
Timer
|
|
Wireless Remote
|
|
Solar System Compatible (Majority)
|
|
ATS (Mains Failure Detection / Auto Transfer Switch)
|
|
Minespec Padlockable Battery Isolator | |
Weight : | 815 kg |
Dimensions : | 187 L x 85 W x 122 H cm |