Specifications

The ABLE 125kVA diesel generator is economical, efficient, silent, and robust, ideal for commercial or industrial power solutions. Housed in a tough-built, silenced, and compact canopy. This generator can run and withstand extreme heat conditions even in Australia’s North.

Powered by a low RPM time-proven reliable OEM 4 cylinder turbo diesel engine with three-phase 4 poles brushless synchronous alternator.

You can opt for a wireless remote start, this generator is built remote start capable. 

 

Key Features:

  • Reliable Engine: Equipped with time-proven reliable OEM 4 Cylinder Turbo-Diesel engine.
  • Robust Design: Tough-built, silenced, weather-resistant canopy designed for outdoor.
  • Watercooled: So it will run and withstands extremely hot conditions while it also extends the life of the engine over time.
  • Stable Operation:  27 Hours continuous stable power at prime load, thanks to its low 1500 RPM engine which generates more stable operation.
  • High-Quality Power: 4-Pole, brushless alternator with AVR outputting
  • Silent Operation:  67dbA at 7 metres, just similar to a normal conversation.
  • Fuel-efficiency: Diesel fuelled - 25 Litres/Hour at prime load
  • Highest Safety Standards: Australian Safety Standards compliant.
  • Easy to Use: The straightforward digital control panel makes the generator easy to use.
  • Easy Transportability: Designed with forklift slots for easy transportation.
  • Easy to Maintain: Oil and filters are all you need.

 

Prime Power : 100kW / 125kVA 415Volts 175Amps
Standby Power : 110kW / 137kVA
Power Factor : 0.8
Phase Voltage : Three Phase 415 Volt
Frequency : 50 Hertz
Engine : OEM 4 Cylinder Turbo Diesel
RPM : 1500/min (Electronically Speed Controlled)
Cooling Method : Water Cooled - Rated For Australia's North
Alternator : Three Phase 4 Pole Brushless Synchronous -/c AVR
Starter System : 24 volt Electric - Battery Included
Controller : Comap MRS11
 
2 Wire / Remote Start Capable
 
Over Temperature Protection
 
Over Current Protection
 
Low Oil Protection
Safety Systems : Battery Isolator
  Emergency Stop
  Failsafe Shutdown Fuel Solenoid
Noise Level : 67 dBA at 7 metres
Fuel Tank Capacity : 680 Litres (-/c Fuel Gauge)
Running Time : 27 Hours Continuous (prime load)
Fuel Consumption : 25 litres/hour (prime load)
Chassis Enclosure : Lockable
  Sound Deadening Throughout
  Weather-Resistant Powder Coating
  Stainless Steel Fittings
  External Use
Mine Site Ready Bunding : Yes
ATS (Mains Failure) : Easy Connect Plug (ATS Box Optional)
Single Phase Outlets : 1 x 15 Amp IP66
Three Phase Outlets : 1 x 20 Amp IP66
  2 x 32 Amp IP66
Hardwire Terminals : Yes
RCD / RCBO : Australian Standard (IP67 Enclosed)
Options : Automatic Start Systems
 
GSM
 
Timer
 
Wireless Remote
 
Solar System Compatible (Majority)
 
ATS (Mains Failure Detection / Auto Transfer Switch)
  Minespec Padlockable Battery Isolator
Weight : 2100 kg
Dimensions : 266 L x 107 W x 188 H cm