Power Equipment

Type B - Female Coupling w/ Male BSP Thread

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Female Stainless Steel Camlock and Groove Coupler
• Male BSP Thread of the Same Size.
• Used With Corresponding Adapters;
• Type A (Female Thread End) Type E (Hose Barb) Type F (Male Thread End) or Type DP (Dust Plug)

Type C - Female Camlock w/ Male Hose Barb

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Female Stainless Steel Camlock and Groove Coupler with Hose Barb
• Used With Corresponding Adapters;
• Type A (Female Thread End) Type E (Hose Barb) Type F (Male Thread End) or Type DP (Dust Plug)

Type D - Female Camlock w/ Female BSP Thread

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Female Stainless Steel Camlock and Groove Coupler
• Female BSP Thread of the Same Size
• Used With Corresponding Adapter, Type A (Female Thread End) Type E (Hose Barb) Type F (Male Thread End) or Type DP (Dust Plug)

Type E - Male Camlock w/ Male Hose Barb

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Male Stainless Steel Camlock and Groove Adaptor
• With Hose Barb
• Used with Corresponding Couplers;
• Type B (male thread end) Type C (hose barb) Type D (female thread end) or Type DC (dust cap)

Type F - Male Camlock w/ Male BSP Thread

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Male Aluminium Camlock and Groove Adaptor
• And Male BSP Thread of the Same Size
• Used with Corresponding Couplers;
• Type B (male thread end) Type C (hose barb) Type D (female thread end) or Type DC (dust cap)

Type A - Male Camlock w/ Female BSP Thread

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Male Stainless Steel Camlock and Groove Adaptor
• Female BSP Thread of the Same Size
• Used with Corresponding Couplers
• Type B (male thread end) Type C (hose barb) Type D (female thread end) or Type DC (dust cap)

Type DC - Dust Cap Female Camlock

• Thread: BSP
• Size Range: 20mm (3/4″) – 100mm (4″)
• Dust Cap. Stainless Steel Camlock and Groove Coupler
• Used to Cover the End of an Adapter.
• Prevents Dust, Dirt, Insects and Small Rodents from Entering the System.
• Used with Type A, E, F Adapters

• Thread: Male BSP
• Size Range:
  • 25mm (1")
  • 38mm (1.5")
  • 50mm (2")
  • 63mm (2.5")
  • 76mm (3")
  • 100mm (4″)
• Suited & Required to fit Scution Hose to Footvalve

• Protect Your Investment
• Baldwin Quality
• TS 16949
• ISO 9001
• Suit 620/680/690 V-Twin

• Protect Your Investment 
• Baldwin Quality
• TS 16949 
• ISO 9001 

These special valves allow the pump to stay primed, letting liquid to flow in, but keeping it from flowing back out. The screens or baskets that cover the valve opening tend to get clogged over time, especially in ponds and wells

Available in:

• 1"
• 1.5:
• 2"
• 3"
• 4"

• Suits GX340 GX390 Style Motors
• Protect Your Investment 
• Baldwin Quality
• TS 16949 
• ISO 9001 

• Suitable for use with all Able pressure washers up to a maximum pressure of 3600 PSI
• Can be used with hot water up to a maximum temperature of 60°C for improved cleaning capability
• Variable angle spray pattern to suit a wide range of cleaning applications
• Perfect for use with foaming car washes for touchless cleaning

Premium Quality Core Drill Bits

Wide Variety In Stock

• Commercial Lance
• Quick Connect Hose Connectors
• 4000PSI

Premium Quality Core Drill Bits

Wide Variety In Stock

• Multiplies ordinary pressure into powerful scrubbing power using a jet stream of rotating water.
• Its powerful strike makes it ideal for cleaning large, flat surfaces such as driveways and patios.
• It rotates at high speeds to increase both the intensity and cleaning area of the spray.
• Increases pressure washers’ cleaning efficiency.
• Brass Construction.

Premium Quality Core Drill Bits

Wide Variety In Stock

• 3400-5000PSI
• Fits any Pressure Washer
  • 1/4" BSP or Quick Connect Fittings
• Uses Dry Sand or Garnet
• No Dust

Premium Quality Core Drill Bits

Wide Variety In Stock

Fast cutting and long life with 10mm high laser welded segments.

Excellent performance and life for the vast majority of today's paving products like concrete and soft to medium hard clay pavers/bricks. 

• 10 Metres
• 4000PSI
• Male & Female quick connector

• 1800-3000psi
• 6-15 lpm
• Plastic / Light Weight

Fast cutting and long life with 10mm high laser welded segments.

Excellent performance and life for the vast majority of today's paving products like concrete and soft to medium hard clay pavers/bricks. 

Fast cutting and long life with 10mm high laser welded segments.

Excellent performance and life for the vast majority of today's paving products like concrete and soft to medium hard clay pavers/bricks. 

• Long Lance - 4 Piece
• Long wand 2.8m
• Inlet / Outlet: M22 x 1/4" Qucik Connect
• Max Temp: 60°C
• Max Pressure 3000 Psi
• Linear Gun

• Dual Outlet

• High / Low Pressure Control

• Commercial Lance

• Quick Connect Hose Connectors

• 5000PSI

• 20 Metres
• 4000PSI
• Male & Female connector

• 3/8"
• 150 p.s.i.
• Auto Lock
• 20m Retractable
• Used By Professionals 
• Reinforced PVC Braided

• Max 3000PSI
• 9.2 Lt / Min
• 19mm engine shaft
• Adjustable Pressure
• Suits Honda or equivalent bolt pattern
• Supplied with quick connect hose fittings

Fast cutting and long life with 10mm high laser welded segments.

Excellent performance and life for the vast majority of today's paving products like concrete and soft to medium hard clay pavers/bricks. 

• 7Horsepower
• 212CC Four Stroke Engine
• Electronic Ignition
• Easy Recoil Start
• Low Oil Shutdown
• 19mm Shaft

Premium Quality Core Drill Bits

Wide Variety In Stock

• High-flow Trigger

• 3/8" QD Inlet & 1/4" QD Outlet

• Commercial Lance

• Aluminium Telescoping Poles

• Quick Connect Hose Connectors

• 4000PSI

• 60C / 140F

• Ideal For Pumping Fuel, Flexi-N, Chemicals Or Poor Quality Water
• Viton Seals Fitted
• Suits 3/4 Inch Threaded Or Keyway Shaft
• Complete With 2.0 Inch Hose Tails
• Pick Up Suction Screen Included

• High-Performance 2.4hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System
• Complete With 1 Inch Hose Tails
• Pick Up Suction Screen Included

• Viton Seals Fitted
• Suits 3/4 Inch Threaded Or Keyway Shaft
• Complete With 3.0 Inch Hose Tails
• Pick Up Suction Screen Included

• High-Performance 2.4hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System
• Complete With 1.5 Inch Hose Tails

• Stand Suit DCDCX2020 Core Drill

• 3200-4000 PSI Pressure
• 15-30 LPM Water Flow
• Maximum Temperature 82 degrees C 
• Strong PVC Body
• Commercial Quality
• Quick Connect To Your Wand
• 2 High Pressure Nozzles
• High Pressure Clean with Splash Protection
• View in Operation on PRODUCT VIDEO

• Locking Pin
• 5000 PSI Swivel 
• 60m of 3/8" Hose (Capacity)
• Includes 1m whip hose
• Inlet / Outlet: 3/8" BSP M/F

• 30M
• 3/4" Hose
• 1" BSP Fitting with 3/4" Hose Tail

• VITON Seals Available For Pumping Chemical Or Diesel Fuel.
• Ideal For Pumping Large Volumes Of Water Cheaply
• High-Performance 6.5hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System

• Perfect Fire Fighting Backup Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• Perfect Fire Fighting Backup Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• VITON SEALS Available For Pumping Chemicals Or Diesel Fuel
• High-Performance 6.5hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start 
• Complete With 3 Inch Hose Tail

• High-Quality Aluminum/Stainless Steel construction
• 3/8″ BSP Female Inlet
• Adapted to suit your pressure requirements (up to 4000psi).
• Spring Loaded Retractable
• Maximum Hose Capacity 15M (50ft) of 5/16" Hose (INCLUDED)
• Mounting points to suit Wall or Floor Application

• 20M
• 1" Hose
• 1" BSP Fitting with 1" Hose Tail

• 4000PSI 
• 13Hp or 15Hp Required
• Honda Bolt Pattern
• Direct Drive
• 15Lt / Min
• 25.4mm shaft

• 3200-4000 PSI Pressure
• 15-30 LPM Water Flow
• Maximum Temperature 82 degrees C 
• Strong PVC Body
• Commercial Quality
• Ergonomic Grip and Handles for Comfortable Operation
• 2 High Pressure Nozzles
• High Pressure Clean with Splash Protection
• View in Operation on PRODUCT VIDEO

• 15 Horsepower
• 420CC Four Stroke Engine
• Electronic Ignition
• Easy Recoil Start
• Low Oil Shutdown
• 25.4MM Shaft

• 60 Metres
• 4000PSI
• Male & Female connector

• Twin Impeller
• Perfect Fire Fighting Backup Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• Twin Impeller
• Perfect Fire Fighting Backup Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• High-Performance 13hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System

• 15 Horsepower
• 420CC Four Stroke Engine
• Electronic Ignition
• Electric Start & Easy Recoil
• Low Oil Shutdown
• 25.4MM Shaft

• 3200-4000 PSI Pressure
• 15-30 LPM Water Flow
• Maximum Temperature 82 degrees C 
• Stainless Steel Construction
• Commercial Quality
• Ergenomic Grip and Handles for Comfortable Operation
• 3 High Pressure Nozzles
• High Pressure Clean with Splash Protection

• Viton Seals Fitted
• Ideal For Pumping Fuel, Flexi-N, Chemicals Or Poor Quality Water
• High-Performance 6.5hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System
• Complete With 2.0 Inch Hose Tails
• Pick Up Suction Screen Included

• Takes Up To 1/2 Inch Solids
• New High-Performance 6.5hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System

• 7.0HP Petrol Pressure Washer
• Easy to move trolley
• Max Pressure 3000PSI
• Easy Pull Start
• Detergent Pickup
• Industrial Grade 10m 4000PSI Hose

• Perfect Fire Fighting Backup Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• New Electric Start Model
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• Single Impellor High Performance Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• New Electric Start Model
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• Viton Seals Fitted
• Ideal For Pumping Fuel, Flexi-N, Chemicals Or Poor Quality Water
• High-Performance 6.5hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System
• Complete With 3 Inch Hose Tails
• Pick Up Suction Screen Included

• Ideal For Pumping Poor Water, Silt, Debris
• Takes Up To 3/4 Inch Solids
• New High-Performance 6.5hp 4 Stroke Petrol Engine
• Low Fuel Consumption
• Recoil Start System
• Transistor Magneto Ignition System

• 16 Horsepower
• Vertical Shaft
• 452CC Four Stroke Engine
• Electronic Ignition 
• Electric Start 
• Dual oil filtration system
• 25.4MM Parallel Shaft with keyway

• Diesel Powered
• 4 Horsepower
• 19mm Horizontal / Parallel Shaft with Keyway
• Electric and Recoil Start
• Yanmar / Honda bolt pattern

• Twin Impellor High Performance Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• New Electric Start Model
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• Twin Impellor High Performance Pump 
• High Performance 6.5hp 4 Stroke Petrol Engine 
• New Electric Start Model
• Low Fuel Consumption
• Recoil Start System 
• Transistor Magneto Ingintion System 

• Sump Pump with 6M Drive Cable
• Available 2 inch or 3 Inch Outlet

• Diesel Powered
• 7 Horsepower
• 25.4mm Horizontal / Parallel Shaft with Keyway
• Electric and Recoil Start
• Yanmar / Honda bolt pattern

• Diesel Powered
• 11 Horsepower
• 25.4mm Horizontal / Parallel Shaft with Keyway
• Electric and Recoil Start
• Yanmar / Honda bolt pattern

• Diesel Powered
• 11 Horsepower
• Tapered Shaft to Suit Generators
• Electric and Recoil Start
• Yanmar / Honda bolt pattern

• Wheel Driven Forward and Reverse
• Height Adjustable Handle
• Adjustable Tilling Depth Up To 350mm
• Tilling Width: 500mm
• Hutchinson Type Flat Belt Drive
• Heavy Duty Gearbox
• Big 12" Strong Tyres
• Low Oil Engine Protection
• Low Maintenance Rotary Hoe
• View in Operation on PRODUCT VIDEO
   

• 6.5HP Four Stroke Petrol
  
• Easy Start Pull
  
• 14inch/350mm Diamond Blade inc.
  
• Max Cutting Depth 100mm
  
• Adjustable Cutting Depth
  
• Lifting Point
  
• Powdercoated Finish

• High-Performance 6.5hp 4 Stroke Loncin Petrol Engine
• High Performance 3 Inch Pump
• Low Fuel Consumption
• Full Frame Protection Offers Exceptional Performance Even In The Toughest Conditions
• Easy Maintenance
• Meets A Wide Range Of Applications

• Petrol 6.5HP Engine
• Height Adjustable Handle
• 920mm (36") Trowel Diameter
• Precise Blade Adjustment

• 6.5HP Petrol Engine
• Sturdy Roll Frame
• Revolution (Rpm): 3200-3400
• Suction /Discharge 2 Inch BSP
• 500 Litres Per Min / 30,000 Litre Per Hour
• 7 Metres Suction Height
• 30 Metres Pump Lift
  

• Alloy Housing
• Brass Impellor
• 70 Metre Head
• Ideal fire fighter
• Electric Start

• 14” 350mm Laser Welded Diamond Blade (Included)
• 2200W Commercial Electric Motor
• Foldable Legs for easy transport and storage
• Very Reliable Easy to Use Machine

• High Performance 3kw Single Phase Electric Motor 
• 3 Metre Lead With 15 Amp Plug
• High Pressure 10m Hose With Quick Release Couplings 
• High Pressure Gun With Safety Lock 
• 10 Inch Solid Rubber Wheels
• Direct Drive Plunger  Pump With Brass Cylinder And Ceramic Pistons
• Low Pressure Detergent Injection
• Inline Water Filter

• High-Performance 13hp 4 Stroke Petrol Engine
• Recoil Start System
• Electric Start System
• Transistor Magneto Ignition System

• Perfect As Fire Fighting Back Up Pump 
• New High Performance 13hp 4 Stroke Petrol Engine 
• Low Fuel Consumption  
• Electric & Recoil Start System 
• Transistor Magneto Ingintion System 
• Cast Iron High Performance Pump 
• 100 Metre Lift